Tutorial: Assign IPv6 Addresses to VPN Clients from a Group Pool – Free/paying customers info injection test

Abstract

This tutorial provides a step-by-step guide for assigning IPv6 addresses to VPN clients from a group pool and testing the setup to ensure functionality.

Overview

Access Server primarily uses IPv4 for incoming VPN connections, but also supports IPv6 routing within the VPN tunnel. This tutorial will guide you through assigning IPv6 addresses to VPN clients using a group-specific address pool. You’ll configure IPv6 routing and assign a pool of IPv6 addresses to VPN clients within a specific group.

By the end of this tutorial, you'll have set up IPv6 routing for a group of VPN clients and tested the configuration by ensuring that clients can access external IPv6 resources.

Note

The IPv6 address 2001:db8 used in our examples is reserved for documentation use.

Replace it with a valid IPv6 address for your network.

Prerequisites

An installed Access Server.
An IPv6 interface and default IPv6 gateway configured on the Access Server host system.
A VPN group and at least one user assigned to it. In this tutorial, we use a group named group-test.
A valid IPv6 address pool to assign to your clients.

Step 1: Enable IPv6 routing

Connect to the console and get root privileges.

Turn on IPv6 routing:

sacli --key "vpn.routing6.enable" --value "true" ConfigPut

Step 2: Route all IPv6 traffic through the tunnel (full tunnel)

Turn on full tunneling to route all IPv6 traffic through the tunnel:

sacli --key "vpn.client.routing6.reroute_gw" --value "true" ConfigPut

Step 3: Create an IPv6 pool for the group

Create a pool of IPv6 addresses to assign to clients in your group. In this example, we use the group group-test and assign the subnet 2001:db8:b84b:5::/112.
```
sacli --user "group-test" --key "group_subnets6.0" --value "2001:db8:b84b:5::/112" UserPropPut
```
- This subnet is a unique local IPv6 address range (similar to private IPv4 ranges) and is not routable over the internet.

Step 4: Configure the IPv6 range

Specify the range of IPv6 addresses that can be assigned to users in the group. For example, use addresses from 2001:db8:b84b:5::8005 to 2001:db8:b84b:5::8009:
```
sacli --user "group-test" --key "group_range6.0" --value "2001:db8:b84b:5::8005-2001:db8:b84b:5::8009" UserPropPut
```
- This assigns the IPv6 range 2001:db8:b84b:5::8005 to 2001:db8:b84b:5::8009 for VPN users in the group-test group. The 2001:db8:: block is reserved for documentation, so replace it with your actual network IPv6 range for real-world applications.

Step 5: Save and apply the configuration

Save and apply the settings by restarting the server:
```
sacli start
```

Step 6: Test the setup

Connect a VPN client that belongs to the group-test group. (We recommend using OpenVPN Connect.)
- The client app shows an IPv6 address assigned from the pool.

Run a ping test to a public IPv6 address:

ping ipv6.google.com

Expected output:

Reply from 2001:db8:4006:81f::200e: bytes=1500 time=30ms TTL=54

Verify the IPv6 traffic reaches the server by running tcpdump on the server:

tcpdump -eni any host ipv6.google.com

Example output from the server while running tcpdump:

root@openvpn-access-server:/usr/local/openvpn_as/scripts# tcpdump -eni any host ipv6.google.com
tcpdump: verbose output suppressed, use -v or -vv for full protocol decode
listening on any, link-type LINUX_SLL (Linux cooked), capture size 262144 bytes

11:44:10.035937 In ethertype IPv6 (0x86dd), length 96: 2001:db8:b84b:5::8005 > 2607:f8b0:4006:81f::200e: ICMP6, echo request, seq 11, length 40
11:44:10.035983 Out d6:77:ce:97:8c:7c ethertype IPv6 (0x86dd), length 96: 2604:a880:400:d0::189e:6005 > 2607:f8b0:4006:81f::200e: ICMP6, echo request, seq 11, length 40
11:44:10.037937 In fe:00:00:00:01:01 ethertype IPv6 (0x86dd), length 96: 2607:f8b0:4006:81f::200e > 2001:db8:b84b:5::8005: ICMP6 echo reply, id 1, seq 11, length 40

The VPN client's IPv6 address is 2001:db8:b84b:5::8005.
The public IPv6 address 2607:f8b0:4006:81f::200e corresponds to Google's IPv6 server (ipv6.google.com).

IPv6 configuration keys

Use the following configuration keys to work with IPv6 in Access Server.

Configuration Key	Type	Description
vpn.routing6.enable	bool	Enable IPv6 routing.
vpn.server.nat6	bool	Enable IPv6 NAT.
vpn.server.nat6.masquerade	bool	Enable IPv6 masquerade.
vpn.client.routing6.reroute_gw	bool	Route all IPv6 traffic through the tunnel.
vpn.server.daemon.vpn_network6	list of subnets	Default IPv6 VPN subnets to be subdivided among OpenVPN daemons: These are used by clients as VPN routing gateways and allocated to non-group clients.
vpn.client.routing6.inter_client	bool	Enable client-to-client IPv6 traffic.
vpn.server.routing6.private_access	string	Controls how to route private traffic: nat route none
vpn.server.routing6.gateway_access	bool (default=true)	If true, clients may access the server-side tun gateway IPv6 address.
vpn.server.routing6.allow_private_nets_to_clients	bool	If true, all IPv6 addresses in vpn.server.routing6.private_network will be allowed to initiate client connections.
vpn.server.routing6.private_network	list of subnets	Access granted to private server-side subnets.
vpn.server.routing6.incoming_network	list of subnets	IPv6 addresses within this range may initiate connections with VPN clients.
vpn.server.routing6.routed_subnets	list of subnets	Subnets that should be routed rather than NATed (when NAT is enabled).
vpn.server.group_pool6	list of subnets	Optional pool of VPN IPv6 addresses to be subdivided across groups that don't define group_subnets6 or group_range6.
vpn.server.routing6.snat_source.N	list of interface and IPv6 address mappings	This defines how to perform Source Network Address Translation (SNAT) for outgoing IPv6 packets. When NAT is enabled, SNAT ensures that VPN client traffic uses a specific IPv6 address or range for outgoing traffic. Specify a range of IPv6 addresses for SNAT on each outgoing network interface. The `N` suffix (e.g., `.0`, `.1`, `.2`, etc.) is required for the configuration to work. The command will not function properly if the `.N` suffix is omitted.
vpn.server.custom_snat6_chain	string	Define a custom ip6tables chain to handle all outgoing NAT.